BlogContact

Pin mapping

Which ESP32 and expander pins the inputs, outputs and peripherals of the boneIO Dimmer Gen1 use

This page is for people writing their own firmware (e.g. SUPLA, Tasmota) or a configuration from scratch. You don't need it for normal setup — the installer at boneio.eu/esp and the ready YAML files already contain these pins.

The tables are generated from the controller's public ESPHome configuration, so they match the firmware. "Inverted" means the active state is low. Ports commented out in the YAML (e.g. Modbus, 1-Wire) are not in the tables — their pins are in the comments of the source file.

v0.3

Source: discontinued/boneio-dimmer_8ch-v0_3.yaml

I2C buses

BusSDASCL
i2cGPIO4GPIO5

Chips on I2C

ChipBusAddressYAML ID
PCF8574i2c0x38pcf_inputs
ina219i2c0x40
ina219i2c0x41
lm75i2c0x48boneIO_temp

Inputs

NameYAML IDOnPinInverted
IN_01in_01PCF8574 0x38 (pcf_inputs)1 (P1)yes
IN_02in_02PCF8574 0x38 (pcf_inputs)2 (P2)yes
IN_03in_03PCF8574 0x38 (pcf_inputs)3 (P3)yes
IN_04in_04PCF8574 0x38 (pcf_inputs)4 (P4)yes
IN_05in_05ESP32GPIO36yes
IN_06in_06ESP32GPIO39yes
IN_07in_07ESP32GPIO34yes
IN_08in_08ESP32GPIO35yes

Outputs

YAML IDNameOnPinInverted
buzzerBuzzerPCF8574 0x38 (pcf_inputs)0 (P0)yes
chl01CHL 01ESP32GPIO33—
chl02CHL 02ESP32GPIO32—
chl03CHL 03ESP32GPIO12—
chl04CHL 04ESP32GPIO14—
chr01CHR 01ESP32GPIO13—
chr02CHR 02ESP32GPIO15—
chr03CHR 03ESP32GPIO2—
chr04CHR 04ESP32GPIO17—

Other pins

FunctionNameOnPinInverted
ethernet.clkethESP32GPIO0—
ethernet.power_pinethESP32GPIO16—
ethernet.mdio_pinethESP32GPIO18—
ethernet.mdc_pinethESP32GPIO23—